Piracy continues!

I must first apologise for the lack of pictures in todays post.

This week has seen some rather unexpected developments on the home front, impinging on my hobby time, so I haven't got as much done as I would like, but work still continues gradually.

My Brig is now fully timber clad, and windows have been added to the stern. Just as I thought all was looking good, I took delivery of my first pack of ships cannons (3-6 lbers from Crusader Miniatures via Old Glory in US) - thanks to Brian Smaller for ordering, and dropping these off for me on Sunday. Now I have the cannons, I realise I will have to make some alterations to the positions of the portholes (is that what you call where the cannon sticks out?), to accommodate the cannons. Not a big job but a little more work.

I also want to elaborate on the ship with addition of railings, and add cargo deck grate covers now, again that I now have the guns for an idea of size.

I can also do the same to my original small sloop, not the railings, but deck grate certainly and cut holes for cannon. So my ships will be approaching completion soon I hope. I also managed to get some 10mm dowel to make masts for Brig.

The Shoppe and Warehouse have had their first coats of paint so they are about half finished now.

Also managed a second game with Brett Mudgeway on Saturday night. He had found his box of pirate goodies from 10 plus years ago... and came with a bunch of Foundry figures, a 12'long slim sloop, complete with huge cannons! Also a whale! Sperm Whale a la Moby Dick, but blue/grey not white. We'll have to come up with some rules for that. Anyone got any ideas, please shout up.

We played a game; Kidnap the Governors daughter. I was the defender with my Pirate Crew. I suppose in that circumstance, his Pirate crew were probably trying to steal her for themselves to get the ransom!
My Captain and three cuttroats with muskets held up in the 'Governors' residence, with the daughter, while my Quartermaster, 2 Mates and a rogue came in from the side. Cunning use of townsfolk as speed bumps and generally getting in the way, slowed up Bretts pirates and gave my crew some cover to get into position. I was going to run them to the residence, but ended up turning and intercepting half of Bretts Pirate crew. A couple of 2 onto 1's and some unlucky dice from Brett, and some decent rolls to kill from me saw several of his crew go down in a couple of turns, and with half his crew down he voluntarily routed. My Captain had a lucky break when Bretts Captain stuck his pistol through groundfloor window and would have had my captains head off - a Fate point turned this into a stung ear instead! ;-)

It's definitely a tricky one this scenario, for the attacker, having played it a couple of times.

Still, a good game we both enjoyed. It's quite simply wonderfully characterful...

We did go through the post game sequence just to see what sort of things can happen: Bretts mate went 'crazy' as a result of his in-game 'death', he also lost a couple of henchmen to 'He's dead Jim! ;-) '. My only casualty; my mate, was captured! Dastardly Brett chose to sell him to the authorities for bounty, although how exactly a pirate crew would managed to contact the authorities, to claim the bounty on another pirate, without getting caught themselves continues to mystify me!

We were hoping to use it as a first game for our campaign but I think with Brett still not being 100% with the rules (his rulebook has not arrived yet) for things like Heroic actions, and us fogetting to record exactly who killed who, we may just put this one down to practice.

Plus we are still trying to fully fathom the Henchman group rules, in terms of group experience etc. This is the only bit of the rules I found a little confusing. I have heard they are derived from the Mordhiem rules, but I have not played that so I am a little in the dark in that respect. A few questions to the LotHS yahoo group will hopefully clear this up.

Well that just about wraps up this post. I hope to press on with more work tonight when I get in from work and get some more pictures of progress up soon.

More Pirate Progress

More work during the week and a wet sunday, allowed more time for some more construction.

I managed to get more work done on my Brig and after the trials and tribulations with the size of the hull sides, I got them clad with 1mm balsa, cut into 5mm thick strips, and again bent with steam, for the bow of the ship. It's coming on nicely I think.

A dock is not complete without some port facilities and heres a start on a dock warehouse building, with double doors for moving cargo in and out.

A port will need stores selling goods to all and sundry, so heres is my first "shoppe" - it may be a general dealer, chandler, or apothecary, I haven't decided yet...

Finally realizing I may be hosting visiting pirate crews in need of a ship, I started another small sloop as per the first one I posted pics about. Heres a shot of how the decks line up before sides are added and cladding done. Besides a port needs several ships about to look right I think.

Work continues apace!

Pirates Progress

I managed to finish off the paint job on my first three pirate themed buildings I've been making recently. I am quite pleased with how they have turned out.

I couldn't resist taking a couple of pictures, with some characterful figures alongside.

I dare say they may well be useful for other periods too, Renaissance period in general and probably Lord of the Rings for areas like Bree and other areas of human dwellings in Eriador.

I have a couple more buildings half assembled now, to continue with.

At the weekend I may hunt through the local $2 stores for plastic plants after a tip off from the Colonel O'Truth. These will help 'vegetate' my Caribbean world.

I've also been continue work on my Gary Chalk Brig. I ran into problems aligning the card hull sides. I am not sure what was intended but I found the template produced a hull side that was too low, not properly reaching the top level of the quarter deck and foredeck. So I used the template to make a larger template that I preferred the look of, and attached those instead. This gives me a barrier at the edge of the quarter deck and a small lip round side of foredeck. I intend to build both up with a wooden railing.

I also wasn't too pleased with the rounded decorative style of the stern from the template, and fashioned a simpler structure. I'll still add window effects using the same green mesh I made the windows with on the above buildings.

I must admit I'm thoroughly enjoying this project, and with PotC Stranger Tides released today, number one son & I are booked to see the movie at the cinema on Saturday :-)

Display cabinets

I finally got my display cabinets fully installed and wired up thanks to a local 'sparky' friend. Also secured to wall, so hope will with stand a wobble or two, that we can get in this part of the world.

They were ordered from Barrie at NZIW LTD in Auckland, and shipped flat packed to my home. It was quite an ordeal assembling them; instructions, yes I am a man but I read them!, were somewhat tricky, to figure out, but I got there in the end, and once I had figured out the first one, the second two were completed fairly quickly, with a little assistance; you nearly always need an extra pair of hands just to hold something, while you fit another part to it... I must admit I was constantly awaiting the sound of breaking glass, but thankfully it never came.

The last part was getting power to them and then fastening them to wall for security.

They came with Halogen lights, but I may look to switch to LED lights as these will be cheaper to run. However I will only have them switched on when I am using the room, which is not as frequently as I would like, so no worries really there.

Well they are up and full of the figures I have been busy with over the last 6 years or so. I can fit more in as needed, and get extra glass shelving too when the time comes that it is needed.

In the meantime, my unpainted hordes stare jealously at their potential new home!

Troll Chieftan

The Mordor Troll Chieftan, a great behemoth of a beast, intent on death and destruction.

A slightly tricky model to photograph for best effect as it has a very stooped forward pose. I tipped it on on a small prop to better view the face, although still somewhat in shadow.

I can't recall if a troll captain features explicitly in the books, but he makes a wonderful movie appearance fighting against Aragorn at the Black Gates at the end of the movie, The Return of the King.

Mordor Catapult

"As soon as the great catapults were set, with many yells and the creaking of rope and winch, they began to throw missiles marvelously high, so that they passed right above the battlement and fell thudding within the first circle of the City; and many of them by some secret art burst into flame as they came toppling down"
The Lord of the Rings, Book Five the War of the Ring, The Siege of Gondor.

The Mordor Catapult, assisted by a troll to load the heavy stone, that will crash against the City of Minas Tirith.

This will give my Mordor force some hard hitting artillery power from long range.

Pirate port takes shape

Over the past week I have made some progress on my pirate port and shipping.

In regards my small pirate sloop, I have attached the sails by 'stitching' them with yarn to the masts, and gluing over this with thinned PVA. The sails are made from cartridge paper, which is a thicker heavy gauge paper, sort of mid way between paper and thin card if I can put it that way. Its a bit stronger than regular paper, so you can pull it about a bit without it tearing, yet its still flexible as paper, rather than card.

I am awaiting the cannons, so I can get a feel for how much deck space they will take up before I add other detail, like ships wheel, and grated cargo hold cover.

I have also started assembling the medium brig from the Gary Chalk ship plans, here's the decks glued together.

I've also got some more work done on the buildings for the port. I added windows using a plastic mesh grid available from haberdashery stores, and 2mm thick balsa cut to strips for timber beams effects.

Finally the roof was clad with 1cm square thin card roof tiles. This was the lengthiest part of project by far. It took me all Saturday evening to clad the two small houses, and about 6 hours on Sunday to do the L-shaped house. That angle, was a real B*tch to work with!

Still they are done now and ready for paint.

I'd still like to make more general dock warehouse buildings, tavern(s) of course, shops and apothecary. A grander, 'Governors mansion' will also be required. And some sort of pirate hideout, and jail/fort type structure.

After chatting with Roly over a coffee on Saturday night, we came up with several ideas for developing land forms to go on to the sea area I have created;
'Treasure Island', pirate hideaway, dock/port with bridge over river mouth to extended town area, etc etc...

Its going to be a lot of work, but I hope the end result will be worth it.

It was interesting watching Sky TV tonight as they had a program on NatGeo, about Port Royal. Nice to see the costumes and more importantly the look of the buildings and town from 3d computer creation. Very interesting also to learn that they had shipped across large amounts of redbrick building materials from UK to Jamaica, and the town would have looked very much like Georgian England of the period.

Here are some pictures courtesy of SKY TVs Nat Geo program "Wicked Pirate City"