The greatest gift at Christmas is...

...Time!

At least that's how I view it. Time away from work to do the things you want to...

Christmas of course, is time with family at home, sharing some quality time, enjoying the kids tear through their prezzies like a hot knife through butter... and of course the Christmas lunch which for most of us Antipodeans means a BBQ in the sun... which I have to say this year was a bit touch and go weather wise, but we struck lucky with the sun breaking through right on cue and lasting long enough, for full tummies to roll inside before the rain started... feet up, DVD on (The Hobbit), and snore the afternoon away... lets face it, up till 12.30am the night before, wrapping and arranging prezzies, then up at the crack of dawn to excited children who can't wait any longer... full tummy, and several glasses of wine later... is it any wonder the adults crash out Christmas arvo? ;-)

As for the Christmas prezzy haul... actually we don't bother for adults... for us its about the kids... but I did lash out in a moments silliness, buying myself a $4 bag of glue sticks and a $4 egg slice for the missus ;-)

Actually, with thoughts leaning towards LOTR / Hobbit I ordered up on a couple of gaps in my collection - I ordered a hobbit set; Paladin Took, Lobellia, Fatty Bolger and Horn blower via folks in UK, and Bullroarer Took from GW NZ online as it wasn't listed on the UK site... sometimes you just have to bite the bullet on price... so they were my Christmas gifts to myself....

Ah, a wonderful time, but what I really enjoy at Christmas is the statutory holidays off, for us poor retail schleps; means Christmas and Boxing day ( if you're lucky - my wife had to work Boxing day arvo), Friday for me was back to work, then luckily enough the weekend free, and rinse and repeat for this week with New Year nearly upon us...

So with this extra time off, whilst kids are busy playing with their new toys together, Dad can potter on ...

I managed two more 2kg bags of Polyfilla (making 3 in total) to add more layers to the Victorian base board to even it up, and allowed it to dry...

I based the Victorian corner tavern to help square it up, and chopped and glued matchsticks to frame out all the windows....

An undercoated 'Baskerville' from EotD Requiem for scale...

Also with the Hobbit/LOTR juices flowing once more I decided to make some repairs / improvements to my Helms Deep board, repairing chipped surface and after a visit to my local hobby store for supplies, poured in more Realistic Water to build up the stream layer. This is to stop models falling over if standing in the stream area... one of my bugbears with skirmish gaming and single based figures... you can make excellent looking terrain, but if its not a flat surface they'll fall over... annoying! Especially banner bearers who you need right up with the action, and if they fall over everyone else gets knocked over too!

'Realistic water' poured... awaiting drying (approx 24hrs)

Great stuff, but not cheap!

Whilst getting my hobby supplies, I included some lemon trees and tomato plants I happened across... perfect to add some life to my proposed Hobbiton build...

 ... and big bag of lichen to make woods look like woods. Had some time with eldest to start the LOTR/ Hobbit, Fall of the Necromancer campaign... the starting scenario pits 4 giant spiders and 2 giant bat swarms against Thranduil and a bunch of wood-elves, on a wooded 24" x 24" board... simple fun...

Mirkwood - Fall of the Necromancer campaign

The odd thing with the SBG LOTR rules are that they define difficult terrain areas, eg. woods, by for example, an area of felt, which affects move rate (if you're not a wood elf, spider or bat swarm) but this wooded area does not impede LOS nor provide cover unless there is an actual tree or bush modeled on it... So a big bag of lichen clumps made for some instant bushes and cover saves (3+ in the way), compared to the trees (4+ in the way)... worked rather well... I did also re-base the trees on 60mm round MDF discs (I bought a new bigger hole cutter) as the smaller bases used previously were not enough to stop them toppling over when knocked...

After gaming was satisfied, and plaster skim coats had dried on board it was time to equip up, and break out the Dremel... its noisy, dusty work, so safety gear is a must... and Ipod music inside ear defenders helps the time pass pleasantly...

 Bzzzzzzzzz, Whirrrrrrr  ...

After about 45 mins I have done a roughly 6" x 6" area... yep this is going to take a while, but I think the end result will be worth it...

I'll keep plodding on with this bit by bit, with breaks... don't want to get 'white finger'...

I am still plodding on with more figure painting too for Curts Challenge, and am focusing the time on the fortnightly themes so I get to score some points!

Just a quick thought on your local hobby store... I must admit I am the first to try and source stuff cheap online where possible... especially model figures, but I do find the local hobby stores great for terrain and craft supplies, and try and support these guys where possible. They are not always the cheapest but you sometimes want something now to crack on with that terrain project, so anywhere selling hobby railway supplies etc., locally can be a goldmine for a wargamer. And compared to GW prices you are bound to save $$$'s...

Hope you are all enjoying your festive time, with family and hobbies...

Regards to all
Scott

Victorian Base board continued...

Well the Challenge is well and truly on, but there's still other work to do too!

Over the weekend, in the lead up to Challenge kick off, I kept busy with terrain matters and got the drain covers sorted for Victorian base board.

The protruding pipe uprights were trimmed flush to board with the dremel, and interior of pipe painted black. Plastic mesh was also cut to size, sprayed black and glued into place. Finally a length of square section thick plastic rod was cut to two small lengths and these glued over the top of the mesh to effect the drain.

This would also gave me an edge to plaster up to when I skim coat the table.

Here's the two drain covers

Whilst various bits of this process were drying, I also managed to make a couple more under table storage units for the games room after redo-ing the table arrangement.

under table storage

Made from 5mm MDF sheet and some timber posts... So plenty of space now to store all the planned EotD Victorian buildings :-)

OK, tonight, whilst some shade wash dries on my current Challenge models... I went back to the base board. I had bought a 2kg bag of polyfilla (not really knowing how much I would need), and a plasterers spreading tool, to try and get the surface as smooth as possible.

After about half an hour I had used the whole bag, making a batch at a time, spreading, and making some more, till I had it as well as I could manage.

So we ended up with this...

I think I am going to need to add another layer of filler to build up a little more as the drain covers are still protruding. I'll wait till it dries fully and get more filler at the weekend...

The beast is tamed!

Ha... think you can out expand me eh? Well we'll see about that... Take that! And this! Ha ha, not so clever now are we? Biff, bash, cut, hack, slash and saw!

Actually it was mostly saw and sand! But it worked...

Once set the material is fairly easy to work with. The outer skin is crusty , whilst the inner surface still retains a slight spongy quality.

So after a bit of work, we are back to this...

I had to be little careful during trimming so I didn't cut the ends off the uprights, just still visible poking up through the surface.

OK next job will be to clad the sides of the board in more MDF, for rigidity and strength and then skim coat the whole top surface in polyfilla. After that sand flat and smooth and, well... I still want a cobblestone pattern over the whole board... and am still leaning towards etching a pattern in with the dremel... it will probably take an age, but should look good in the end...

Cobblestones

I haven't found a cost effective way of covering the board in a suitable pattern. Several suppliers do cobble patterns in pre-made pieces or molds to make yourself... but these cost the earth in pre-made pieces to cover this size of board, or the rubber latex mold making material and then casting material will all add up and probably end up taking just as long to cast it all and fit it all together...

So I think the dremel will be the cost effective way to go... time will be the only factor...

Smoke

On the smoke making front I have run into a slight problem - getting the dry-ice. BOC in Wellington sell it, but thats 50kms away, and they are only open Mon-Fri , the same days I work. When I am free to go down at the weekend to get it, they're closed... what a pain! Shame I can't just nip down to the local store and grab a pack when I need it... curses! Plus even if you can get it, its time sensitive stuff due to storage conditions... it literally goes off. You cant keep it in the domestic freezer either as it could knacker the thermostat... it seems really a buy and use immediately type thing, which is tricky with the supply situation here...

I looked at another way... CO2 fire extinguishers can be used to make dry-ice; just wrap a pillow case tightly round the nozzle and set it off, the pillow case catches the dry-ice formed coming out the end. But CO2 extinguishers are not cheaply or locally available either...

So I am now exploring smoke machines... these things seem to run on 'fog juice' which seems to be a mix of distilled water and glycerin, both of which I can get from the pharmacy. Heat this mix up and it gives off smoke vapours... I'll have to have a play about and see what I come up with...

I have also made a start tonight drawing out plans for the corner pub/tavern... Just need cutting the bits out of the MDF sheet now and start putting it together...

[UPDATE - Millsy suggested split peas for cobblestones so I went to grocery store to have a look. I thought the split peas were too big, but did find some red lentil that looked a smaller better size - I'll have a play with these]

It Lives...!

It lives master, it lives... heck, that's what it feels like using this stuff...

With the poly sheet and piping glued down I decided to fill the void around the pipe with expanding foam filler... I'd used a can of this ages ago, thinking it might create some rather cool cliffs I could carve and sculpt, but I found it too uncontrollable, when used without a controlling frame of reference... and ended up with a huge uncontrolled and unusable 'blob' and just biffed it in the bin... that was quite sometime ago... I do recall it made a right mess and was a bugger to try and clean up, darn stuff seem to stick to everything...

So with that vague memory haunting me somewhat I set to again, read the directions... yeah I know, men don't read instructions ;-)... and even read the ones on the can of clean up spray I got too...

With latex gloves on, and hearty high ho silver, I let rip... is that it...? OK squirt a bit more... still seems a bit thin and hasn't reached the top of the poly sheet yet... hmm, squirt a bit more ... there that'll do... OK clean up time... wahay this stuff is pressurized spray acetone... wee ...nice smell,  splash it on all over, eh 'arry? 'arry? Wheres 'arry?

Thank the Gods I had opened the windows, or I'd be floating round the ceiling somewhere...

Anyhoo... I got cleaned up so I can use the rest of can for something else... gave it half an hour or so, (drying time on can) and came back, and its swelled like you can see below!

... by the end of the night, its just about doubled in size again... I foresee a hearty time with the bread knife and dremel tomorrow! Wish me luck!

If your gonna use the one on the left, make sure you get the one on the right as well! You have been warned!

Oh, and you can probably use about half the amount you think you're gonna need, coz yep, it expands, ...just not instantly...

A foggy day in old London Town! - WIP - Empire of the Dead base board

With Curts painting challenge approaching, over on Analogue Hobbies blog, I have been hard out all week prepping stuff to paint for the challenge... So far I have 5 15mm PSC Panzer IV F1's, a Battlefront 15cm sFH18 Howitzer battery of 4 guns, another pack of Battlefront Begleit Tank escorts, for my StuGs, my Hobbit set of 13 Dwarves and Radagast have been rescued from the back of the painting table, and I made a start on my Requiem EotD stuff, prepping the Gentlemen with Guns, Lycaons, and the character pack of Dracula, his brides and Renfield. I've also done the 4 40k terminators to go with the test Das Reich terminator I did sometime ago...

So if I get through that little lot over the next couple of months I will be thrilled. I am keeping an eye on the fortnight theme aspects of the challenge too, and have some ideas for civvies, casualties etc...

After all that figure prepping, I thought the weekend, should give me a little time to work on terrain, and a wet and windy Saturday gave me a perfect chance to make a start on my Empire of the Dead London base board...

Now since some fine fellows suggested I should try and add some fog effects to my terrain board to go with the Building lights and Gaslamps I did, I thought I had better make a start...

I got a sheet of 5mm MDF and a 2" think sheet of polystyrene, cutting both to 48" x 48". I also got some 15mm dia plumbing pipe, with simple screw-fit connections, and made a start on a piped sewer system. I blanked off the ends of the pipe and added an upright to each that will just stick up proud of the poly sheet for now. This will be covered with a pastic mesh that will look like a drain cover...

The pipework will allow dry-ice to be pumped into the game, giving a foggy ground layer to the game.


Here's the pipework in place, on the MDF sheet.

I also used the pipework as a template to cut out the poly sheet...

Then the pipework was glued into place, and the poly sheet glued down around it. This will all dry overnight, giving the PVA glue a good chance to dry out. The books weigh it all down while it sets... I knew all those rule books, supplements, magazines and history books would be good for something! ;-)

While all that is drying... I finished off my 'smoke machine'... an empty 900g powdered food tin, a 2.5" 2nd hand computer case fan, a 9v battery cap connector was soldered to this, to power it up, glued to the plastic lid of the tin, that I had cut a fan sized hole in, so it blows down into the tin. An off cut of plastic pipe, and a bought piece of flexible pipe from the plumb shop, and we are ready to go... hot glue and insulating tape finishes it off...

...so this is all connected to the pipe 'sewer' system, via a screw fit straight connector... all I am waiting for is a test run...

...I need to get some dry-ice... the trick is, put some boiling water in the tin, drop in some dry-ice, put lid on and whack the fan on and, hopefully, hey presto - a smoke laden gaming board...

...for the chemically curious among you, the dry-ice, sublimes, i.e. goes from a solid, straight to a gas, missing out the liquid phase... to create a cold ground hugging fog effect... common to all those 70's pop group stage videos etc. and cheesy horror movies...

Warnings! - the dry-ice is seriously cold ( −78.5 °C), handle with thick gloves to avoid frost burns, oh and the gas is  CO₂, so open the windows too, to avoid hypercapnia!

If I get it all to work, I'll upload a video... fingers crossed!